CLV(i)
15 You will make the hollow tapers for the tabernacle of standing acacia boards;
16 ten cubits shall be the length of one hollow taper, and a cubit and a half cubit the width of one hollow taper.
17 Two sloping side boards shall there be to one hollow taper, being projected each to its fellow: thus shall you do for all the hollow tapers of the tabernacle.
18 You will make the hollow tapers for the tabernacle, twenty hollow tapers for the edge toward the Negev, southward;"
19 and forty sockets of silver shall you make under the twenty hollow tapers, two sockets under one hollow taper for its two sloping side boards, and two sockets under another hollow taper for its two sloping side boards.
20 Also for the second angle wall of the tabernacle for the north edge you shall make twenty hollow tapers,
21 with their forty sockets of silver, two sockets under one hollow taper, and two sockets under another hollow taper.
22 Yet for the flanks of the tabernacle seaward shall you make six hollow tapers;
23 And two hollow tapers shall you make for the cutout corners of the tabernacle, in the flanks.
24 Then couplings shall come to be below, and they shall come to be coupled together on its top by one ring. Thus shall it come to be for the two of them, for the two cutout corners shall they come to be.
25 There will come to be eight hollow tapers and their silver sockets, sixteen sockets, two sockets under one hollow taper, and two sockets under another hollow taper.
26 You will make bars of acacia wood, five for the hollow tapers of one angle wall of the tabernacle,
27 five bars for the hollow tapers of the second angle wall of the tabernacle, and five bars for the hollow tapers of the angle wall for the flanks of the tabernacle seaward;"
28 and the middle bar in the midst of the hollow tapers reaching from end to end.
29 The hollow tapers shall you overlay with gold; and their rings shall you make of gold, as housings for the bars, and you will overlay the bars with gold.
30 Then you will set up the tabernacle according to its custom which you are shown on the mount.